Aloishes
Full Member
If I was a robot I could fly
Posts: 106
|
Post by Aloishes on Mar 2, 2005 14:47:18 GMT -6
change the strings one at a time or it will mess up your guitar neck
|
|
|
Post by Blondie on Mar 2, 2005 14:50:28 GMT -6
no it won't
|
|
|
Post by guitarplayinfool on Mar 2, 2005 16:49:19 GMT -6
If you have a floyd rose type bridge I have heard that the proper order to change the strings is b, d, g, a, high e, low e. It seems to spread the tension more evenly if you tune each string to pitch once you put it on. That way you dont spend hours of tuning your guitar back up to pitch. Once they are strectched they should stay in good tune even with big bends given you have a good tremelo with a trem-setter or something like that which can help your bridge have a more consistent neutral position.
|
|
|
Post by Cacophony on Mar 2, 2005 16:57:31 GMT -6
Low E, it seems trendy
|
|
Caleb
Junior Member
Posts: 55
|
Post by Caleb on Mar 8, 2005 16:04:00 GMT -6
Always low E, and work my way down.
|
|
Pavel
Full Member
Posts: 165
|
Post by Pavel on Mar 9, 2005 16:50:26 GMT -6
I change the Low E first....don't ask me why.....
|
|
|
Post by HlynurStef on Mar 10, 2005 16:47:48 GMT -6
The low E, but sometimes I go for the high e... I haven't got a clue why
|
|
PatrickofMoon
Full Member
Love is the dance of eternity
Posts: 106
|
Post by PatrickofMoon on Mar 14, 2005 1:19:07 GMT -6
One string at a time, usually starting with the High E string getting replaced first because it usually takes the longest to stretch out
|
|
|
Post by Dimebag on May 1, 2005 3:17:18 GMT -6
So is lemon oil something you need to buy, or can it be made at home?
|
|
|
Post by Heather on May 20, 2005 12:01:03 GMT -6
So is lemon oil something you need to buy, or can it be made at home? You can buy it from a music store or ebay is about $4.95 remember just clean the frettboard with it let it seat for a while use another soft rag an whipe out the whole frettboard don't use on maple necks cause they are already finished don't need it .
|
|
|
Post by Blondie on May 20, 2005 12:07:50 GMT -6
Some mapleboards needs oil too. My Jem 777 f.ex.
|
|
|
Post by clameo on May 20, 2005 13:04:04 GMT -6
My Jem 777 f.ex. You've got a Jem too?! I thought that shredders don't use Jems If you've got a guitar that has a fixed bridge (eg. Fender Stratocaster, Gibson Les Paul etc.) then it doesn't matter which string you remove first, but if you have a guitar with floating bridge (eg. Ibanez, Jackson etc.), then probably the best way is to change one string at a time, starting from low E. An important part of changing strings is also cleaning your guitar, because if your guitar's neck is dirty then your brand new strings will get dirty also.
|
|
|
Post by Blondie on May 20, 2005 13:25:56 GMT -6
|
|
|
Post by clameo on May 20, 2005 14:13:56 GMT -6
Me too
|
|
|
Post by Heather on May 24, 2005 9:41:33 GMT -6
Some mapleboards needs oil too. My Jem 777 f.ex. It is weird cause maple is finished and specially on Jem guitars, what i am trying to say here is "do not use lemon oil on maples " just use mineral oil no chemicals are on it
|
|
|
Post by Blondie on May 24, 2005 18:07:34 GMT -6
You may be right but it doesn't feel finished and it feels better after I oil it
|
|
|
Post by Shredder Steve on Jun 3, 2005 15:16:04 GMT -6
Ive got a floyd rose so first I have to stabilize the bridge, then i take all the strings off in whatever order i feel like, then i usually replace them in this order, e g a b d e.
|
|